Technical specifications of the McCloskey I34R compact mobile rotor crusher:
Impact chamber with a diameter of 900 mm and a width of 820 mm. Engine: 252 hp (188 kW) Volvo D8 T4 Final. Built-in hydraulic folding conveyors. Sturdy construction with l-profile steel frame. Open chassis design for easy accessibility. Quick set-up time for efficient operation. Apron adjustment for both primary and secondary crushing. Double-deck return screen of 2000 x 1100 m. Swivel return conveyor for handling over-grain.
Dimensions and weights:
Transport length: 13.020 m
Transport width: 2.55m
Transport height: 3.056m
Weight: 27,500 kg
Capacities:
Diesel tank: 280 liters
Hydraulic tank: 430 liters
Impact Breaking Room:
Feed opening WxH: 860 x 830 mm
Impactor rotor: 900 mm diameter x 820 mm wide
Rotor speed: 678 x 756 t/min
Number of aprons: 1
Number of impactors: 4
Weight of impactor: 148 kg
Crusher drive: direct
Feed dimension: 600 500 x 500 mm
Impactor weight: 7150 kg
Rotor weight: 1789 kg
CSS adjustment: hydraulic cylinder- shim system
Speed sensor: yes
Load sensor: yes
Release bunker:
Submission bunker:
Bunker width: 2102 mm
Bunker length: 4230 mm
Drive: hydraulic
Engine: Turolla 42.9 cc
Adjustable speed
Max. speed: 970 to
Volume: 2.6m3
Side conveyor:
Stock height: 2583 mm
Belt width: 500 mm
Belt spec. EP 400/3+1.5
Motor OMS315
Adjustable speed
Main conveyor belt:
Stock height: 3006 mm
Belt width: 900 mm
Belt spec. EP 500/3 8+12
Motor OMS 500
Adjustable speed
Fine discharge conveyor belt:
Stock height: 2544 mm
Belt width: 900 mm
Belt spec. EP 500/3 8+2
Motor OMS 400
Adjustable speed
Sieve box:
Top deck dimensions: 2000 x 1100 mm
Bearing type: SKF22215
Sieve angle: 25°
Sieve motor: Turolla 38.6 cc
Drive system: Direct HRC 130 clutch
Hydraulic flow rate 50.8 L/min
Adjustable speed
Sieve stroke adjustable: 8 - 10mm
Sieve 'G' force: 5.05
Top deck transfer tape:
Belt width: 500 mm
Belt type: Vol 400/3 4+2
Motor OMH 500
Adjustable speed
Max. speed: up to 113 rpm (rotations per minute)
Return conveyor belt:
Belt width: 400 mm
Belt type: Vol400/3 6+1.5
Motor OMS 315
Adjustable speed
Max. speed: up to 128 Rpm (rotations per minute)
Swivel: 180°
Propulsion and hydraulics:
Engine: Volvo D8 Tier 4 Final
Engine power: 188 Kw
Engine speed: 1750 - 1950 r/min
Crusher drive clutch: PT Tech HPT012
Flywheel pump Turolla 31.8/31.8/22.5
PTO pump: Turolla 25.4/22.5
Total system flow: 263.7 lpm
Hydraulic tank capacity: 470 liters
Hydraulic tank ratio: 1.78 : 1
Hydraulic cooler
Magnet:
Band width: 559 mm
Double-pole
Reversible
Electricity:
Emergency plugs: 4 pieces
Wiring: armed cable
Start siren: yes, 10-second delay
Control panel: Tedd Engineering/IFM
Engine shutdown:- low oil pressure; high water temperature; air filter blockage; fuel contamination; hydaulic level; hydraulic oil temperature
Remote control for chains and feed hopper
Cable control
Chains:
Width: 400 mm
Length: 3240 mm
Height: 738 mm
Drive box: Bonfiglioli 709
Max speed: 1.2 km/h
3 speeds via control panel
Options:
Main conveyor belt adjustable speed
Water pump and dust control
Different grades of impact bars
Work lights
Band weighting
Fuel filling pump
Half height impact bars
Lift equipment
Safety features:
External adjustable belt tensioners External lubrication points Motor protection system Full protection of pinch points
For more information or a demonstration of this machine at your yard, contact us: info@naessens-hydraulics.be